Surface Analysis (KLA/Tencor Surfscan)

From UCSB Nanofab Wiki
Revision as of 08:44, 11 April 2019 by John d (talk | contribs) (Documentation: minor formating)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Surface Analysis (KLA/Tencor Surfscan)
KLA.jpg
Tool Type Inspection, Test and Characterization
Location Bay 5
Supervisor Biljana Stamenic
Supervisor Phone (805) 893-4002
Supervisor E-Mail biljana@ece.ucsb.edu
Description Surface Analysis
KLA/Tencor Surfscan 
Manufacturer Tencor


About

This system uses a laser-based scattering method to count size and distribution of particles (or other scattering defects) on a flat wafer surface. It can scan wafers in size from 4 to 6 inches.

Documentation

Screenshots

UCSBTEST2 for big size particles (1.6-28.0)um
UCSBTEST2 for small size particles (0.16-1.6)um