Spin Rinse Dryer (SemiTool)

From UCSB Nanofab Wiki
Revision as of 16:13, 7 September 2017 by John d (talk | contribs) (tool template @ top)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Spin Rinse Dryer (SemiTool)
SpinRinse.jpg
Tool Type Wet Processing
Location Bay 7
Supervisor Don Freeborn
Supervisor Phone (805) 893-7975
Supervisor E-Mail dfreeborn@ece.ucsb.edu
Description ?
Manufacturer SemiTool



Two Spin-Rinse Dryers are available, one for 4-inch wafers and one for 6-inch wafers.

Each has a dedicated cassette that can hold up to 25 wafers.

The tool is set up to rinse at ~1000 rpm while spraying DI water, and then Dry in nitrogen at ~2000 rpm. A "Dry Only" option is also available.